ZoomSilca
Titanium Direct Mount Derailleur Hanger - SRAM
Improve your shifting performance with a new derailleur hanger that is up to 12x as stiff as the stock aluminum hanger and 2-10g lighter
SILCA 3D printed titanium derailleur hangers bring increased strength and stiffness to this overlooked component so critical to quick and precise shifting. Modern electronic derailleurs shift so fast, and with such force, that conventional hangers made from low grade aluminum plate will flex up to 4 degrees during a shift resulting in less precise and slower shifting. Using advanced 3D modeling with AI generated structural infill, SILCA 3DP Hangers are 2-7x stiffer than aluminum hangers while also being 2-6 grams lighter depending on model.
Already in use at the World Tour level SILCA 3DP Hangers were utilized in 2 stage wins of the 2023 Tour de France and are credited with maintaining derailleur alignment across numerous crashes.
SILCA 3DP Hangers are able to be aligned by hand, and are designed with an internal fracture notch which allows the hanger to fracture and bend below the point of damage for the carbon frame to eliminate the risk of frame damage under the hardest of impacts.
Key Features:
- Silca Road Derailleur Hangers are designed to assist fast, precise and quiet shifting
- Tested and proven at World Tour level
- 3D printed from titanium
- Extra strength means less need to align hanger/adjust derailleur after minor impacts
- With frame saving fracture notch, designed to become sacrificial under hardest impacts
- SRAM hangers 5-7x stiffer
- SRAM hangers 2-6g lighter
Improve your shifting performance with a new derailleur hanger that is up to 12x as stiff as the stock aluminum hanger and 2-10g lighter
SILCA 3D printed titanium derailleur hangers bring increased strength and stiffness to this overlooked component so critical to quick and precise shifting. Modern electronic derailleurs shift so fast, and with such force, that conventional hangers made from low grade aluminum plate will flex up to 4 degrees during a shift resulting in less precise and slower shifting. Using advanced 3D modeling with AI generated structural infill, SILCA 3DP Hangers are 2-7x stiffer than aluminum hangers while also being 2-6 grams lighter depending on model.
Already in use at the World Tour level SILCA 3DP Hangers were utilized in 2 stage wins of the 2023 Tour de France and are credited with maintaining derailleur alignment across numerous crashes.
SILCA 3DP Hangers are able to be aligned by hand, and are designed with an internal fracture notch which allows the hanger to fracture and bend below the point of damage for the carbon frame to eliminate the risk of frame damage under the hardest of impacts.
Key Features:
- Silca Road Derailleur Hangers are designed to assist fast, precise and quiet shifting
- Tested and proven at World Tour level
- 3D printed from titanium
- Extra strength means less need to align hanger/adjust derailleur after minor impacts
- With frame saving fracture notch, designed to become sacrificial under hardest impacts
- SRAM hangers 5-7x stiffer
- SRAM hangers 2-6g lighter
