ZoomChris King
R45 Rear Road Bike Hub
- Spread the cost over 6, 12, 24 or 36 months
- 0% APR Finance available on 6, 12, 24 months for orders over £250
- 0% APR Finance available on 36 months for orders over £1500
- Pay as little as 10% deposit
When we set out to design the R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive™ system with 45 teeth for lower drag and near-instant engagement with a lightweight hub body and our legendary made-in-house bearings.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings are what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured, and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our R45 Hub Service Tool
- Available with Shimano/Sram HG or Sram XDR driveshell
- Available in 28h, and 32h
- Ceramic bearing upgrade available
Specifications:
- Axle Width: 130mm
- Flange Diameter DS & NDS: 51mm
- Center to Flange DS: 17mm
- Center to Flange NDS: 34.3mm
When we set out to design the R45 hub we had over 30 years of bearing experience and 20 years of building hubs under our belts. The R45 is the culmination of that experience; we focused on creating a lightweight road racing hub that utilized hallmarks of Chris King components: precision, performance, and quality. Our R45 rear hub combines a redesigned RingDrive™ system with 45 teeth for lower drag and near-instant engagement with a lightweight hub body and our legendary made-in-house bearings.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings are what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 45-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured, and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our R45 Hub Service Tool
- Available with Shimano/Sram HG or Sram XDR driveshell
- Available in 28h, and 32h
- Ceramic bearing upgrade available
Specifications:
- Axle Width: 130mm
- Flange Diameter DS & NDS: 51mm
- Center to Flange DS: 17mm
- Center to Flange NDS: 34.3mm
