Praxis Works
SRAM DUB 68/73 BSA Bottom Bracket

This is the Praxis BSA threaded bottom bracket for installing an Sram DUB crank into a BSA threaded frame.

Specifications

Buy This If: You installing a SRAM DUB crank into a BSA threaded frame.
Frame/Crank: Only for these exact SRAM DUB Crank setups:

• 68mm ROAD
• 73mm ROAD "Wide"
• 68mm MTN
• 68mm MTN "Wide"
• 73mm MTN
• 73mm MTN "Wide"
• 73mm MTN "SuperBoost"
• 83mm DH.

Tool: Must use a single M30 Socket Tool or M30 Wrench Tool for install/removal. VIP - This BB is *not* installed with SRAM Dub tool.
Bearings: Cartridge Steel | Enduro. These are specifically made for use with SRAM DUB/29mm crank spindles. 29mm Drive and a 29mm NonDrive Bearing.
MFG: Forged and machined heat-treated alloy cups.
AVG. Weight: 95g +/-.
Please Note: DUB is a registered trademark of SRAM, LLC | SRAM is registered trademark of SRAM, LLC