ZoomPraxis Works
MTN Wave 1x Chainring - 104BCD
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminum and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring - going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.
Specifications:
- 104 BCD | 30T - 36T | 7075-T6
- Wave™ Tech tooth profile
- 10/11/12sp Shimano/KMC/SRAM
- Stamped and machined manufacturing with hard black anodizing for durability
- 30T NOTE: is a threaded and needs M8 bolt with min 7.5mm length threads
- REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
- In very rough terrain, or just for pure security, we still recommend use of an upper guide
Compatibility:
- Will mount to most any 4-arm 104BCD MTB crank
- 30T is a threaded ring and needs M8 male bolt with min 7.5mm length for interface
- RD- Must use with Mid or Long cage ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
- In very rough terrain, or just for pure security, we still recommend use of an upper guide
Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminum and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring - going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.
Specifications:
- 104 BCD | 30T - 36T | 7075-T6
- Wave™ Tech tooth profile
- 10/11/12sp Shimano/KMC/SRAM
- Stamped and machined manufacturing with hard black anodizing for durability
- 30T NOTE: is a threaded and needs M8 bolt with min 7.5mm length threads
- REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
- In very rough terrain, or just for pure security, we still recommend use of an upper guide
Compatibility:
- Will mount to most any 4-arm 104BCD MTB crank
- 30T is a threaded ring and needs M8 male bolt with min 7.5mm length for interface
- RD- Must use with Mid or Long cage ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
- In very rough terrain, or just for pure security, we still recommend use of an upper guide
