ZoomFerodo
DOT 5.1 Brake Fluid for E-Bikes
Technical Details:
- Dry boiling point: 274°C
- Wet boiling point: 184°C
- Kinematic viscosity (Cst): 750 at -40°C
Main Features:
- Recommended for general all-round use
- Adheres to DOT 5.1 specification
- Low viscosity down to -40°C optimizes performance under all conditions (meets ISO 4925 Class 6 (750 Cst @ -40°C))
- Low corrosion
- Very low rubber swell
WARNING: Recommended for general all round use. As this is a glycol-ether based composition it should never be mixed with mineral oil brake fluids.
Usage restricted to experienced mechanics only. Contains polyalkylene glycol ether and other esters. Keep out of reach of children. Avoid excessive skin contact. If swallowed, seek medical advise and show the container. In case of eye contact, flush with water for 10 minutes.
Technical Details:
- Dry boiling point: 274°C
- Wet boiling point: 184°C
- Kinematic viscosity (Cst): 750 at -40°C
Main Features:
- Recommended for general all-round use
- Adheres to DOT 5.1 specification
- Low viscosity down to -40°C optimizes performance under all conditions (meets ISO 4925 Class 6 (750 Cst @ -40°C))
- Low corrosion
- Very low rubber swell
WARNING: Recommended for general all round use. As this is a glycol-ether based composition it should never be mixed with mineral oil brake fluids.
Usage restricted to experienced mechanics only. Contains polyalkylene glycol ether and other esters. Keep out of reach of children. Avoid excessive skin contact. If swallowed, seek medical advise and show the container. In case of eye contact, flush with water for 10 minutes.
