ZoomErgon
IP Touring Solestar Insoles
Misalignment of the feet can significantly limit the enjoyment of cycling. With the IP Touring Solestar, Ergon offers all touring riders a significant gain in comfort, especially when covering longer distances. The patented stabilization delta keeps the foot in an ergonomic position, prevents discomfort and optimally transfers leg power to the pedal. Efficiency is maximized with a grippy surface made of nylon fabric. Finely ground walnut shells in the 3D foam padding aid in a keeping the feet cool. The insole shell, made of fiberglass composite, enhances pedaling efficiency. The IP Touring Solestar was developed with the internationally renowned insole specialist Solestar.
The foot must be stabilized when cycling
The foot and ankle must allow extremely complex movements in everyday life and sports. 26 bones, 33 joints and more than 100 ligaments are responsible for this. However, when it comes to movement during cycling, this mobility is rather disadvantageous and prevents optimal power transmission to the pedal. Everyday or outdoor shoes often used for touring and trekking do not stabilize the foot on typical platform pedals. The lack of optimal alignment of the foot-knee-hip axis often causes discomfort in the feet and/or knees. With the ergonomic IP Touring Solestar insole Ergon solves these problems.
Patented Stabilization Delta
The patented Solestar Stabilization Delta of the IP Touring Solestar keeps the foot in a natural neutral position and prevents inward and outward movements. The big toe base joint is lowered, the outer edge of the forefoot is raised, the ankle joint is supported - more power, greater comfort and better efficiency are the result.
Optimal support
Whether a professional on a road bike or a recreational touring/trekking rider, all cyclists need stability in the foot. Stability is especially needed in loose fitting shoes with a soft sole, which are usually worn on leisure tours without clipless pedals. The Ergon insoles provide the necessary support and stability. On longer rides, optimal support is a decisive factor for overall comfort. Equally important, when off the bike, comfortable walking is possible with the IP Touring Solestar.
Ergonomics well thought out
Feet naturally move inward and outward under load (pronation/supination). On the bike, however, these movements are biomechanically and ergonomically disadvantageous: loss of strength, strain on ligaments, tendons and joints are the consequences. The IP Touring Solestar effectively prevents these movements and keep the feet stable and enables comfortable, relaxed cycling.
No burning feet, no tingling toes
Many bikers are familiar with burning feet, unpleasant tingling or pain between the toes and knee problems. These discomforts often cloud the fun of cycling and cost valuable time in competition. The Ergon insoles can significantly reduce these discomforts.
Special materials complement each other perfectly
The IP Pro Solestar is constructed from three layers of different materials that complement each other perfectly. The robust surface is made of non-slip nylon fabric, at the bottom the stabilization shell made of fiberglass composite and ensures effective power transmission, and in the middle the 3-D padding is made of closed-cell orthopedic EVA foam which guarantees optimum cushioning.
Technical Specifications:
- Use: Touring, Fitness, E-MTB, Cit
- Colour: Black
- Top Layer: Robust surface made of natural fiber fabric
- Padding: EVA foam with portion from ground walnut shells
- Shell: Glass Fiber Composite
Misalignment of the feet can significantly limit the enjoyment of cycling. With the IP Touring Solestar, Ergon offers all touring riders a significant gain in comfort, especially when covering longer distances. The patented stabilization delta keeps the foot in an ergonomic position, prevents discomfort and optimally transfers leg power to the pedal. Efficiency is maximized with a grippy surface made of nylon fabric. Finely ground walnut shells in the 3D foam padding aid in a keeping the feet cool. The insole shell, made of fiberglass composite, enhances pedaling efficiency. The IP Touring Solestar was developed with the internationally renowned insole specialist Solestar.
The foot must be stabilized when cycling
The foot and ankle must allow extremely complex movements in everyday life and sports. 26 bones, 33 joints and more than 100 ligaments are responsible for this. However, when it comes to movement during cycling, this mobility is rather disadvantageous and prevents optimal power transmission to the pedal. Everyday or outdoor shoes often used for touring and trekking do not stabilize the foot on typical platform pedals. The lack of optimal alignment of the foot-knee-hip axis often causes discomfort in the feet and/or knees. With the ergonomic IP Touring Solestar insole Ergon solves these problems.
Patented Stabilization Delta
The patented Solestar Stabilization Delta of the IP Touring Solestar keeps the foot in a natural neutral position and prevents inward and outward movements. The big toe base joint is lowered, the outer edge of the forefoot is raised, the ankle joint is supported - more power, greater comfort and better efficiency are the result.
Optimal support
Whether a professional on a road bike or a recreational touring/trekking rider, all cyclists need stability in the foot. Stability is especially needed in loose fitting shoes with a soft sole, which are usually worn on leisure tours without clipless pedals. The Ergon insoles provide the necessary support and stability. On longer rides, optimal support is a decisive factor for overall comfort. Equally important, when off the bike, comfortable walking is possible with the IP Touring Solestar.
Ergonomics well thought out
Feet naturally move inward and outward under load (pronation/supination). On the bike, however, these movements are biomechanically and ergonomically disadvantageous: loss of strength, strain on ligaments, tendons and joints are the consequences. The IP Touring Solestar effectively prevents these movements and keep the feet stable and enables comfortable, relaxed cycling.
No burning feet, no tingling toes
Many bikers are familiar with burning feet, unpleasant tingling or pain between the toes and knee problems. These discomforts often cloud the fun of cycling and cost valuable time in competition. The Ergon insoles can significantly reduce these discomforts.
Special materials complement each other perfectly
The IP Pro Solestar is constructed from three layers of different materials that complement each other perfectly. The robust surface is made of non-slip nylon fabric, at the bottom the stabilization shell made of fiberglass composite and ensures effective power transmission, and in the middle the 3-D padding is made of closed-cell orthopedic EVA foam which guarantees optimum cushioning.
Technical Specifications:
- Use: Touring, Fitness, E-MTB, Cit
- Colour: Black
- Top Layer: Robust surface made of natural fiber fabric
- Padding: EVA foam with portion from ground walnut shells
- Shell: Glass Fiber Composite
