ZoomSilca
Eolo III CO2 Inflator
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, 'Before EOLO, you had to turn the cartridge and pray!' Giving the user the ability to regulate the flow of gas into the tire was the key to widespread adoption of compressed gas for roadside use.
EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with light action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely in the USA from Alcoa aluminum and stainless steel. Hardened 17-4 puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years.
3 Insulating rings on the EOLO body improve grip and insulate from cold during inflation. EOLO III ships with Red-White-Red rings as well as one Blue and one Green ring to provide for customization of the regulator body.
SILCA Ultra-Premium CO2 Cartridges are the finest available in the world. While traditional 16 gram cartridges are only required to contain as little as 14 gm of gas, ours are guaranteed to contain 15.5-16.0gm. Produced in Austria, our supplier produces most all cartridges for automotive airbag and military/aviation life-vest inflation and is ISO, TUV and RoHS certified to ensure the highest quality, safety, and environmental responsibility.
Proprietary SILCA Cartridge Helmets eliminate cartridge thread damage as well as puncture risk when the cartridges are stored in a seat-bag, toolbox or other difficult environment. The helmets also allow the cartridges to be pre-lubricated to ensure a perfect seal during use and eliminate gas escape caused by poor-thread/cartridge interface.
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, 'Before EOLO, you had to turn the cartridge and pray!' Giving the user the ability to regulate the flow of gas into the tire was the key to widespread adoption of compressed gas for roadside use.
EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with light action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely in the USA from Alcoa aluminum and stainless steel. Hardened 17-4 puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years.
3 Insulating rings on the EOLO body improve grip and insulate from cold during inflation. EOLO III ships with Red-White-Red rings as well as one Blue and one Green ring to provide for customization of the regulator body.
SILCA Ultra-Premium CO2 Cartridges are the finest available in the world. While traditional 16 gram cartridges are only required to contain as little as 14 gm of gas, ours are guaranteed to contain 15.5-16.0gm. Produced in Austria, our supplier produces most all cartridges for automotive airbag and military/aviation life-vest inflation and is ISO, TUV and RoHS certified to ensure the highest quality, safety, and environmental responsibility.
Proprietary SILCA Cartridge Helmets eliminate cartridge thread damage as well as puncture risk when the cartridges are stored in a seat-bag, toolbox or other difficult environment. The helmets also allow the cartridges to be pre-lubricated to ensure a perfect seal during use and eliminate gas escape caused by poor-thread/cartridge interface.
