ZoomBusch And Muller
Toplight 2C 5 - 15V DC Rear Rack Mount Light
Minimalist design and fully functional. In the dark 'C' shaped arcs of light to each side combine with superbly bright rear light out which is powered by two high power LEDs.
What is LineTec?
When a rear light shines only as a single point of light, other traffic participants approaching a bicycle at night from behind can estimate the distance only inadequately. This changes when the rear light becomes a wide light strip: Now the distance can be perceived much more accurately, because the light strip emits a "spatial light" in the 'spaceless' dark. This special technology that creates a homogeneous light strip from one high output LED is called LineTec
Please note the following recommendations from Busch+Müller if you are planning to install your own E-Bike lighting system:
Establish and/or measure the voltage on the cables or connecting point intended for the connection. Make sure this is within the parameters of the light specification.
Establish and/or measure the polarity of the above mentioned connection and make sure to connect respectively to the correct pole using the instructions and/or the + / - signs on the light.
If you are not able to establish either of the above, or are not sure then please refer to your local electric bike specialist to install the lights for you.
Key Features:
- Suitable for 5 - 15 V DC supply
- For E-Bikes up to 25 Km/H
- Incorporates LineTec technology
- LED rear light
- Integrated Z reflector
- 50/80mm vario fitting
- Rack mounting
- Ideal for Bromptons
- For use only with E-Bikes only
Minimalist design and fully functional. In the dark 'C' shaped arcs of light to each side combine with superbly bright rear light out which is powered by two high power LEDs.
What is LineTec?
When a rear light shines only as a single point of light, other traffic participants approaching a bicycle at night from behind can estimate the distance only inadequately. This changes when the rear light becomes a wide light strip: Now the distance can be perceived much more accurately, because the light strip emits a "spatial light" in the 'spaceless' dark. This special technology that creates a homogeneous light strip from one high output LED is called LineTec
Please note the following recommendations from Busch+Müller if you are planning to install your own E-Bike lighting system:
Establish and/or measure the voltage on the cables or connecting point intended for the connection. Make sure this is within the parameters of the light specification.
Establish and/or measure the polarity of the above mentioned connection and make sure to connect respectively to the correct pole using the instructions and/or the + / - signs on the light.
If you are not able to establish either of the above, or are not sure then please refer to your local electric bike specialist to install the lights for you.
Key Features:
- Suitable for 5 - 15 V DC supply
- For E-Bikes up to 25 Km/H
- Incorporates LineTec technology
- LED rear light
- Integrated Z reflector
- 50/80mm vario fitting
- Rack mounting
- Ideal for Bromptons
- For use only with E-Bikes only
