ZoomBox Components
Hex Lab Oversized 28.6mm BMX Handlebar Stem
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers.
Features:
- Oversized
- Lightweight 3D Hollow Design
- Front-Load Clamp Design to Fight Pull-Up Forces
- Large Bar Bore
- Large Clamping Bolts
- Superior Strength
Specification:
Material: 6061-T6 Aluminum
Process: 3D Cold-Forged
Hardware: Chromoly Clamping Bolts
Finish: Anodized w/Laser-Etched Graphics
Size:
· Length: 40mm, 45mm
· Clamp Diameter: 28.6mm
· Stack Height: 38mm
· Rise: +/-5Ëš
· Steerer Tube: 1”
Weight:
· 40mm: 106 g / 3.7 oz
· 45mm: 115 g / 3.8 oz
All Box stems are engineered and crafted using our Oversized Technology. As we follow the load paths down the handlebars we have focused our attention on the stem-to-bar interface. Since the Oversized handlebars have an increased wall thickness and tube diameter in this sector we have reciprocated with an augmented stem interface with greater surface area. We’ve done this by moving material from low stress areas. This has greatly minimized twist and contributed to responsiveness. As the stem in mated with the handlebars we have contributed to increased pedaling stiffness by providing a backstop to the “lifting” phenomenon. There is no point pushing hard on your pedals if you can’t pull up on your handlebars and deliver that power. Power can easily be lost to handlebar-to-stem deflection and the consequences can be poor power delivery and steering control. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model stem pushes our Oversized Technology to the extreme as it maximizes the shift of material from low stress zones to the Oversized interface. These stems are engineered for the smaller-sized racers.
Features:
- Oversized
- Lightweight 3D Hollow Design
- Front-Load Clamp Design to Fight Pull-Up Forces
- Large Bar Bore
- Large Clamping Bolts
- Superior Strength
Specification:
Material: 6061-T6 Aluminum
Process: 3D Cold-Forged
Hardware: Chromoly Clamping Bolts
Finish: Anodized w/Laser-Etched Graphics
Size:
· Length: 40mm, 45mm
· Clamp Diameter: 28.6mm
· Stack Height: 38mm
· Rise: +/-5Ëš
· Steerer Tube: 1”
Weight:
· 40mm: 106 g / 3.7 oz
· 45mm: 115 g / 3.8 oz
