Wheels Manufacturing
386EVO to 24/22mm Crank Spindle Shims

Run SRAM cranks in your 386EVO frame

• Shims are based on industry standard 386EVO bottom bracket shells
• 386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.5mm-wide shell
• Easy to install and machined for exact fit
• Shims press fit directly into 386EVO bearings (6806 30mm ID bearings)
• You will need the 386EVO bearings already installed into the 386EVO shell to start this conversion
• Removal is the opposite of installation
• You may need to gently tap them out from the opposite side